Home  
Site Partners: Veloce Books OldRacingCars.com  

Go Back   TenTenths Motorsport Forum > Historic Racing & Motorsport History > The Chassis History Archive

Reply
 
Thread Tools Display Modes
Old 10 Nov 2014, 17:33 (Ref:3473451)   #76
Maxwalker
Rookie
 
Join Date: Jul 2013
Posts: 15
Maxwalker should be qualifying in the top 10 on the grid
Hello guys,
Does anyone of you have pictures about Peter Gethin's BT16?
Archives tell that he raced the car for the Motor Show '200', in 1966, at Brands Hatch and at Albi as well.

Regards

Last edited by Maxwalker; 10 Nov 2014 at 17:41.
Maxwalker is offline  
Quote
Old 10 Apr 2017, 09:58 (Ref:3725256)   #77
gip
Rookie
 
Join Date: Apr 2017
Posts: 3
gip should be qualifying in the top 10 on the grid
Documents request

Quote:
Originally Posted by alleggerita View Post
During my research on Alfa Romeo race cars, i have found and bought a collection of old race documents from he 60´s (entry sheets/technical inspection sheets) from Italy, these also included documents regarding the following cars:

F2-5-65
F2-8-65
F2-9-65
F2-12-65
F2-14-65
F2-18-65
F2-20-65
F2-21-65
F2-25-66
F2-29-65
F2-30-65
F2-33-65

I would like to sell these documents to the owners of the cars, so if you are an owner of any of these cars, please send me a private mail.

Kind regards

Patrick Dasse
Hamburg, Germany
Hi Patrick i'm interested please email me to info@mgp1.com
Best Regards
Gip
gip is offline  
Quote
Old 10 Apr 2017, 10:04 (Ref:3725258)   #78
allenbrown
OldRacingCars.com
Veteran
 
allenbrown's Avatar
 
Join Date: Dec 1999
Location:
Farnborough, Hampshire, England
Posts: 3,942
allenbrown should be qualifying in the top 10 on the gridallenbrown should be qualifying in the top 10 on the grid
Quote:
Originally Posted by gip View Post
Hi Patrick i'm interested please email me to info@mgp1.com
Best Regards
Gip
Those are long gone!
allenbrown is offline  
Quote
Old 14 Apr 2017, 14:20 (Ref:3726370)   #79
gip
Rookie
 
Join Date: Apr 2017
Posts: 3
gip should be qualifying in the top 10 on the grid
Bt 16

Hi thanks, any possibility to discover something more about the bt16:
F2-21-65?
Where gone after Bellasi?
To De Adamich or to Facetti?
Which are the main differences from bt15? Apart the engine sca/mae
gip is offline  
Quote
Old 14 Apr 2017, 17:13 (Ref:3726413)   #80
phdm
Racer
 
Join Date: Jan 2004
Belgium
Liège
Posts: 332
phdm should be qualifying in the top 10 on the grid
Quote:
Originally Posted by gip View Post
Hi thanks, any possibility to discover something more about the bt16:
F2-21-65?
Where gone after Bellasi?
To De Adamich or to Facetti?
Which are the main differences from bt15? Apart the engine sca/mae
Gearbox, brakes, driveshafts, fuel tanks.
phdm is offline  
Quote
Old 16 Apr 2017, 21:14 (Ref:3727189)   #81
gip
Rookie
 
Join Date: Apr 2017
Posts: 3
gip should be qualifying in the top 10 on the grid
Quote:
Originally Posted by phdm View Post
Gearbox, brakes, driveshafts, fuel tanks.
Ok thanks but may you explain me better about the differences of these parts in bt15 and bt16?
Thanks a lot
gip is offline  
Quote
Old 18 Apr 2017, 17:58 (Ref:3727614)   #82
bschenker
Rookie
 
Join Date: Apr 2017
Location:
Lugano
Posts: 5
bschenker should be qualifying in the top 10 on the grid
Brabham BT16-21-F2-65
One of the 4 cars of the Martinelli Sonvico Racing Team was used in a few races by Guglielmo Bellasi.
Last race for M&S 04.09.1966 Trofeo AGIP in Monza as F3 with Clay Regazzoni (Instead of Silvio Moser).



With the follow result.


The chassis without engine was purchased by Fredy Amweg CH, repaired and equipped with a 1.6l Lotus Ford. This car he had in use up to the sale 1971 to Hans Obrist CH.


Unfortunately, I could not find any further details about the remaining of this car.
bschenker is offline  
Quote
Old 22 Apr 2017, 22:23 (Ref:3728464)   #83
bschenker
Rookie
 
Join Date: Apr 2017
Location:
Lugano
Posts: 5
bschenker should be qualifying in the top 10 on the grid
Regarding the Brabham BT15 / 16 of the Martinelli & Sonvico Racing Team, we have created the following list for the book "Silvio Moser - Pilota indipendente":


http://www.silviomoser.ch/2014schedeBT15BT16.pdf
bschenker is offline  
Quote
Old 26 Apr 2017, 15:56 (Ref:3729328)   #84
bschenker
Rookie
 
Join Date: Apr 2017
Location:
Lugano
Posts: 5
bschenker should be qualifying in the top 10 on the grid
Fredy Amweg with the Brabham BT16-21-F2-65 on the Kerenzerberg (CH) hill race 29.09.1970.


bschenker is offline  
Quote
Old 7 May 2017, 15:33 (Ref:3731975)   #85
Maxwalker
Rookie
 
Join Date: Jul 2013
Posts: 15
Maxwalker should be qualifying in the top 10 on the grid
The last picture you post about the chassis repaired made me compare with my BT16 (AM57). I mean that the roll hoop seems to be very similar and wheels to be at the same width.
In my case it is the opposite, I know the story from now to approximately the early 80's/late 70's. The last known owner was leading a Citroen garage in Marseille, France (specialized in Panhard, and I know by some people that he had had switzerland customers). I supposed the car has been crashed because pedals are wrong fitting and the oil tank has moved to the back. It might be a coincidence!

Kind regards,



Maxwalker is offline  
Quote
Old 13 May 2017, 18:09 (Ref:3733262)   #86
bschenker
Rookie
 
Join Date: Apr 2017
Location:
Lugano
Posts: 5
bschenker should be qualifying in the top 10 on the grid
Images from BT16-21-F2-65 today received from a friend.






bschenker is offline  
Quote
Old 16 May 2017, 09:01 (Ref:3733785)   #87
phdm
Racer
 
Join Date: Jan 2004
Belgium
Liège
Posts: 332
phdm should be qualifying in the top 10 on the grid
Quote:
Originally Posted by bschenker View Post
Images from BT16-21-F2-65 today received from a friend.






Beat,
I have seen these photos before.
The car ended up in Belgium and I believe that it is now in the UK after passing through the hands of a dealer in the north of France.

http://www.race-cars.com/carsold/bra...9/b16009ss.htm

Take a look at the photos. The specific roll hoop and rear bracing and the steering wheel are the same.
phdm is offline  
Quote
Old 16 May 2017, 09:08 (Ref:3733787)   #88
phdm
Racer
 
Join Date: Jan 2004
Belgium
Liège
Posts: 332
phdm should be qualifying in the top 10 on the grid
Quote:
Originally Posted by Maxwalker View Post
The last picture you post about the chassis repaired made me compare with my BT16 (AM57). I mean that the roll hoop seems to be very similar and wheels to be at the same width.
In my case it is the opposite, I know the story from now to approximately the early 80's/late 70's. The last known owner was leading a Citroen garage in Marseille, France (specialized in Panhard, and I know by some people that he had had switzerland customers). I supposed the car has been crashed because pedals are wrong fitting and the oil tank has moved to the back. It might be a coincidence!

Kind regards,




AM57 was "restored" by a Mr Mathevet in France many years ago.
It had an MAE engine with twin downdraft carbs.
I have a few photos of the car going back to that time.
Because of the wrong pedal arrangement (and probably some other reasons), someone tried later on to sell this car as BT6 !

Incidentally, I owned a few years ago AM56 that had come from Switzerland and had been fitted with an ugly Sbarro bodywork.
phdm is offline  
Quote
Old 16 May 2017, 14:43 (Ref:3733878)   #89
Maxwalker
Rookie
 
Join Date: Jul 2013
Posts: 15
Maxwalker should be qualifying in the top 10 on the grid
Quote:
Originally Posted by phdm View Post
AM57 was "restored" by a Mr Mathevet in France many years ago.
It had an MAE engine with twin downdraft carbs.
I have a few photos of the car going back to that time.
Because of the wrong pedal arrangement (and probably some other reasons), someone tried later on to sell this car as BT6 !

Incidentally, I owned a few years ago AM56 that had come from Switzerland and had been fitted with an ugly Sbarro bodywork.
You are definitly right, we were in contact a few years ago.
At the moment I know the previous owner before Mr Mathevet. His name was Mr Henri Pugnot (as I mentioned above he was leading a Citroen garage in Marseille, France) but apparently he passed away. I am still looking for the contact of his son, Claude.
Maxwalker is offline  
Quote
Old 16 May 2017, 16:55 (Ref:3733892)   #90
bschenker
Rookie
 
Join Date: Apr 2017
Location:
Lugano
Posts: 5
bschenker should be qualifying in the top 10 on the grid
Quote:
Originally Posted by phdm View Post
Beat,
I have seen these photos before.
The car ended up in Belgium and I believe that it is now in the UK after passing through the hands of a dealer in the north of France.

http://www.race-cars.com/carsold/bra...9/b16009ss.htm

Take a look at the photos. The specific roll hoop and rear bracing and the steering wheel are the same.
Clearly the same car!


Then would be clarified around which BT16 it is exactly?
Sonvico & Martinelli bought two new BT16s in 1965 BT16-09-F2-65 and BT16-21-F2-65.


If Sonvico did not make a mess, the BT16-09-F2-65 was sold to New Zealand bevor September 66 and should have been there in 2003 after a mail I received.


There was then still the somewhat later bought BT16-02-F2-65, which was at that time until the sale in spring 1967 in the garage Silvio Moser.


So the Monza accident car had been the BT16-21-F2-65. That this accidental chassis was sold to Fredy Amweg is unambiguous. Fredy Amweg has done the repair and modifications in his workshop. Including the steering wheel made by himself.



However, in the link http://www.race-cars.com/carsold/bra...9/b16009ss.htm it is called BT16-09-F2-65.


So the @Maxwalker named car with AM57 has nothing to do with it?


No one was known at Sonvico the AM numbers, the AM41 number is for which chassis correct.


Perhaps someone know the correct AM numbers of the following chassis?
BT16-02-F2-65
BT16-09-F2-65
BT16-21-F2-65
BT15-16-F3-65

.
bschenker is offline  
Quote
Old 17 May 2017, 08:51 (Ref:3734017)   #91
Maxwalker
Rookie
 
Join Date: Jul 2013
Posts: 15
Maxwalker should be qualifying in the top 10 on the grid
Quote:
Originally Posted by bschenker View Post
So the @Maxwalker named car with AM57 has nothing to do with it?
I think so
Maxwalker is offline  
Quote
Old 5 Apr 2022, 08:33 (Ref:4105377)   #92
Maxwalker
Rookie
 
Join Date: Jul 2013
Posts: 15
Maxwalker should be qualifying in the top 10 on the grid
Quote:
Originally Posted by phdm View Post
AM57 was "restored" by a Mr Mathevet in France many years ago.
[...]
Incidentally, I owned a few years ago AM56 that had come from Switzerland and had been fitted with an ugly Sbarro bodywork.
Some more news about this car.
I figured out three previous owners.
Before Mr Mathevet, it was owned by Mr Pugnot who led a Citroen garage in Marseille, South of France.
He bought this car in 1976/1977 to Michel Hugon and resprayed it in British Racing Green.
Mr. Hugon confirmed to me that when he get the car it had a red bodywork.
Himself bought it in "La Reole", a small village nearby Nogaro, to a Ford agency services garage called "garage Thomas".
The first 10 years will probably be the more difficult to recover!

Does anyone have info/photos from Trevor Blokdyk's BT16 crashed in Albi in 1965?
He had a long recovery prior to race again in May 1966. Was it the same chassis that has been repaired or a new one when he started racing again?
Maxwalker is offline  
Quote
Old 5 Apr 2022, 12:03 (Ref:4105392)   #93
phdm
Racer
 
Join Date: Jan 2004
Belgium
Liège
Posts: 332
phdm should be qualifying in the top 10 on the grid
The Bokdyk car was actually a BT15 (F3-22-65) that later went to Jean Sulpice.

Refer to: https://tentenths.com/forum/showpost...&postcount=107

Did your investigations about AM57 allow you to determine when and by whom the front end of the car was repaired with floor mounted pedals ?
phdm is offline  
Quote
Old 6 Apr 2022, 18:14 (Ref:4105555)   #94
Maxwalker
Rookie
 
Join Date: Jul 2013
Posts: 15
Maxwalker should be qualifying in the top 10 on the grid
From Brabham production tables it seems that 26 BT15 and 21 BT16 F2/3 were produced in 1965. How can we confirm if it was BT15 or 16?

From records and after speaking with someone who assisted in live to Blokdyk's crash, I would have no doubt that it was in September 1965.
This person told me that he hit a bale of straw from the front end and the car rolled over a few times.
He didn't race until May next year due to major injuries.
http://www.racingyears.com/driver.ph...Trevor+Blokdyk
http://www.racingyears.com/race.php?...ate=1965-09-26

I've been in touched with Jean-Bernard Sulpice in 2018 (Jean Sulpice is the french singer by the way). He confirmed me by email that the chassis he bought to Blokdyk was not crashed.
Sulpice sold it (ad published in Sport Auto magazine, n°78 - July 1968) to a swiss guy in 1968 (he doesn't remember the name, but only to have performed the VAT exemption process...) without the engine that he kept for his pygmee. Would it be linked with Sbarro and AM56 with twin cam...?!
Attached some pictures of the car shared by Sulpice, I have no legend on it.

I wonder if the wrecked car did not end up somewhere and if Blokdyk didnt go with another one after he recovered?!

Unfortunately my investigations does not allow to specify who did the repair.
But I know that this car has never been used (even in races/events) since Hugon sold it. He had it in order to train himself for 1975 "Volant Shell".
I do believe the repairs were done before.
Attached Thumbnails
DSC08572.jpg   DSC08573.JPG   DSC08571.JPG  


Last edited by Maxwalker; 6 Apr 2022 at 18:34.
Maxwalker is offline  
Quote
Old 6 Apr 2022, 18:38 (Ref:4105559)   #95
phdm
Racer
 
Join Date: Jan 2004
Belgium
Liège
Posts: 332
phdm should be qualifying in the top 10 on the grid
This car has 1100 series driveshafts, as fitted to the BT15.
A BT16 would have the larger 1300 series driveshafts.
phdm is offline  
Quote
Old 7 Apr 2022, 08:26 (Ref:4105630)   #96
allenbrown
OldRacingCars.com
Veteran
 
allenbrown's Avatar
 
Join Date: Dec 1999
Location:
Farnborough, Hampshire, England
Posts: 3,942
allenbrown should be qualifying in the top 10 on the gridallenbrown should be qualifying in the top 10 on the grid
Jo Vonlanthen and Bruno Wernli both raced unidentified BT15s in Switzerland in 1969. They might be a good place to start.

Also Arthur Frischknecht raced one in September 1968, but then acquired a Merlyn for 1969.
allenbrown is offline  
Quote
Old 19 Apr 2022, 16:43 (Ref:4107295)   #97
Maxwalker
Rookie
 
Join Date: Jul 2013
Posts: 15
Maxwalker should be qualifying in the top 10 on the grid
Quote:
Originally Posted by phdm View Post
This car has 1100 series driveshafts, as fitted to the BT15.
A BT16 would have the larger 1300 series driveshafts.
Agree with you, but seems not very definitive on Brabham side as per datasheet attached (found somewhere (Tentenths?!) on the internet).
Attached Thumbnails
BT 14 15 16.jpg   BT15 1.jpg  
Maxwalker is offline  
Quote
Old 6 May 2022, 07:00 (Ref:4109028)   #98
Simon Hadfield
Veteran
 
Join Date: Mar 2006
Posts: 520
Simon Hadfield should be qualifying in the top 10 on the gridSimon Hadfield should be qualifying in the top 10 on the grid
The lower water rail built in to the chassis is different where it meets the engine by the seat back bulkhead on the BT15 and BT 16. Can you provide a photograph of that detail?
Simon Hadfield is offline  
Quote
Old 18 May 2022, 17:10 (Ref:4110484)   #99
Maxwalker
Rookie
 
Join Date: Jul 2013
Posts: 15
Maxwalker should be qualifying in the top 10 on the grid
It might not be very visible on the pictures attached, but outlet tube is inside the reverse "Y" behind the seat bulkhead.
Following car refit, they used this tube as a channel for an oil pipe.
Was not this difference between BT16/15 to BT14?
Attached Thumbnails
IMG_5787.jpg   IMG_5651.jpg   IMG_5652.jpg  


Last edited by Maxwalker; 18 May 2022 at 17:37.
Maxwalker is offline  
Quote
Old 27 Jun 2023, 16:10 (Ref:4165690)   #100
Maxwalker
Rookie
 
Join Date: Jul 2013
Posts: 15
Maxwalker should be qualifying in the top 10 on the grid
Pursuing the restoration of AM57 chassis mentioned above, I made few interesting discoveries (pictures in attachements):
-Old chassis paint matching original RAL 7024 used in period
-Brazing marks in the area of pedal mountings, cross tube basement from dashboard frame to front frame, seat supports, matching with original BT16 chassis arrangement
-Dzus fitting behind the front frame might suggest a bodywork in two parts may have been used...

Still 10 years of history to recover from 1966 to 1976.
Will start looking at magazines by any clue if an ad from '70 to '75 can be relevant to fill the gap.
Attached Thumbnails
brazed_master_cylinder_support_frame.JPG   brazed_pedals_throttle_support.JPG   brazed_seat_support.JPG  

cross_tube1.JPG   IMG_7472.JPG   Right_side_coolant_pipe.JPG  

Maxwalker is offline  
Quote
Reply
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Brabham BT36 Bryan Miller The Chassis History Archive 593 3 Apr 2022 20:09
Brabham BT60 Red Bladder Motorsport History 9 2 May 2020 11:51
Brabham BT40 Bryan Miller The Chassis History Archive 192 9 Oct 2018 21:45
Brabham Trimar Racing Technology 1 9 May 2001 04:31


All times are GMT. The time now is 14:55.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Original Website Copyright © 1998-2003 Craig Antil. All Rights Reserved.
Ten-Tenths Motorsport Forums Copyright © 2004-2021 Royalridge Computing. All Rights Reserved.
Ten-Tenths Motorsport Forums Copyright © 2021-2022 Grant MacDonald. All Rights Reserved.