Magneti Marelli DDU210 dash

[roquete]

Hello, sorry to make my first post asking someting but i have found this forum in a search for magneti marelli software.
My friend have recently bought a renault clio R3 for rally, and it have been set up with a ecumaster because of the lacking software from magneti marelli, car now is working great but now we need to interface it to the DDU 210 dash that come with the car, but i have found nothing in MM website, no software download or user manual either.
Does anyone have software and some manual with specs about the can ID or other documentation?
Tanks

[EfiOz]

The SRTE ecu is what runs the dash on that model, the dash is not configured as a standalone unit.

[EfiOz]

And the mapping software is available from Renaultsport, you just need to ask.

[roquete]

hi, i need to configure the dash either to work as standalone or by can with the Ecumaster, Magneti Merelli ecu dont work anymore.
I have registered at Renault sport extranet will wait for their response
tanks

[roquete]

But if someone here could sort it out faster would be nice since rally is in at next 27/28 of march
Tanks

[EfiOz]

I'm sorry to say but I wouldn't expect an answer. You may have just chosen a very expensive option.

[roquete]

A few minutes ago the previous owner started sending me all docs and software on a cd he forgot he had.
seems i may have to either buy another dash or go back to magneti marelli ecu if its unlocked to tune with the new engine parts.
tanks for your help.

[EfiOz]

There's a lot available for modification in the customer maps. It's really only the configuration side of it that's locked up.

[roquete]

Hi, after much trouble solution was a power steering from clio 2 and racelogic dash. Been trying to find axon tool to try on the dash but i dont think will work with rs232 from ecumaster.

[paul m]

Hi,

What is happening with the Magneti Marelli ECU and Dash?? Assuming you are not reusing them.

Paul

[roquete]

Originally Posted by paul m

Hi,

What is happening with the Magneti Marelli ECU and Dash?? Assuming you are not reusing them.

Paul

we needed to tune for some changes in engine, but MM maybie give support to renault but not to the end user, only one cd in the car with vision and cfg file only gives access to diagnostics, so all MM stuff is out.
ecu master, racelogic dash and power steering from clio 2 is now working in the car with full access to it and cheaper then MM.

[EfiOz]

Originally Posted by roquete

we needed to tune for some changes in engine, but MM maybie give support to renault but not to the end user, only one cd in the car with vision and cfg file only gives access to diagnostics, so all MM stuff is out.
ecu master, racelogic dash and power steering from clio 2 is now working in the car with full access to it and cheaper then MM.

The mapping files (PTA) are avilable on the Renaultsport extranet as I told you earlier.

MM only make the stuff, they don't tune it.

[roquete]

Originally Posted by EfiOz

The mapping files (PTA) are avilable on the Renaultsport extranet as I told you earlier.

MM only make the stuff, they don't tune8 it.

i have register at extranet renaul sport, but they still didt give me access, rally is this weekend if we waited this long there was no rally for us.
will still wait and keep the MM stuff.

[EfiOz]

That is strange. They usually get back to me overnight (I'm on the other side of the globe).