Vision query

[Richard Young]

A friend has just acquired a Vision Clubmans car - Vauxhall powered - and at the first test...........Oops !

Rresult ? A well-crunched nose, skewed front wings and n/s front wishbones, upright, steering arm etc.
Does anybody know if/where such items exist these days.
I understand there's a lot of Ralt RT3 componentry in a Vision, but we're slightly at a loss as to which bits. Is the nose, for example, a Ralt component or a unique item ?
All help appreciated.

[lifeline-fire]

The vision was designed and built by Peter Kolby who latterly designed the Nemesis rear engine car. I think the suspension was Ralt but that is about it.
The Nemesis is built in the noth east and is run by Paul Gibson. I understand Peter is no longer there.
I may have some contact details
PM me if you need any further help

JIM

[andy97]

From the BARC Opens Sports Car Series website:

Paul Gibson - GPC Motorsport (Nemesis) 07836 545159

or www.gpcmotorsport.com

Nemesis is what developed out of the former "Vision" company.

[DaveK]

Originally Posted by Richard Young

A friend has just acquired a Vision Clubmans car - Vauxhall powered - and at the first test...........Oops !

Rresult ? A well-crunched nose, skewed front wings and n/s front wishbones, upright, steering arm etc.
Does anybody know if/where such items exist these days.
I understand there's a lot of Ralt RT3 componentry in a Vision, but we're slightly at a loss as to which bits. Is the nose, for example, a Ralt component or a unique item ?
All help appreciated.

Richard , I have a contact for nose cones and bodywork for the Vision as i have the ex-kenny allen/deryk young car.

Is it upper rocker or lower wishbone that was damaged ? There were 2 designs of top rocker with different angles available depending on how high up the top mounting is. I have a spare lower wishbone that you can take measurements from if needed

Front wings can be adapted from any thing really, i have some single piece wings ( i fitted Haggispeed wings ) if they are any use

Uprights are std Ralt as far as i can recall and steering arms can be easily made

Thanks

Dave

[Baldybeere]

Hi
I was just searching for vision stuff and saw this thread. I did very much the same thing up shelsley. I had Janspeed make me new top rocker arms. They had my old ones and made jigs Etc to make new ones. Try them. Contact is as follows Mark Vaughan. 01722 321833.