Home  
Site Partners: SpotterGuides Veloce Books  
Related Sites: Your Link Here  

Go Back   TenTenths Motorsport Forum > Racing Talk > Racing Technology

Reply
 
Thread Tools Display Modes
Old 22 Sep 2010, 20:51 (Ref:2763244)   #1
WideOn
Rookie
 
Join Date: Sep 2010
Posts: 6
WideOn should be qualifying in the top 10 on the grid
ROLLING ROAD SUN/MAHA RAM ROAD A MATCI X11 2WD

ROLLING ROAD SUN/MAHA RAM X11 2WD

i have one of these rolling road , all set up with power plot as the computer is some old very old pc27e card in side the pc is very very old

ok now one day i was moving then computer get clean it out as it was very dirty and there a 37 pin D plug on the back of the computer and connected to the PC27E card will i pulled out the wires there 3 wires from the rolling road one is yellow the other red and blue

i have try putting the wire in crasy places and get nothing i am looking for the info on how to wire this up so the computer is back working

so 37 d plug connected to 3 wires via the rolling road need help as i got then info on the card and still have no idea just wire / 3 yellow looks to me like analog ground

please help thanks a await your message

p.s if anyone have one i can ring and ask feel free to drop me a pM
WideOn is offline  
Quote
Old 23 Sep 2010, 12:59 (Ref:2763517)   #2
phoenix
Veteran
 
phoenix's Avatar
 
Join Date: Jul 2005
European Union
Posts: 1,981
phoenix should be qualifying in the top 5 on the gridphoenix should be qualifying in the top 5 on the grid
I would look for the pins on the plug that show evidence of the wires having been ripped off.

Then, this may help:

http://www.amplicon.co.uk/manuals/pc27e.pdf

If you are right about the yellow wire being analogue ground, it should go to pin 3.

I would take a guess that the other two wires are channel 0 and channel 1, so pins 4 and 5. But that is simply a guess as I have no way of knowing how the board channels have been programmed.

If the evidence from inspection of the plug is that two pins other than 4 and 5 originally had connections to them, try with red on one and blue on the other. If that doesn't work, swap them round.

I am assuming that the computer needs two analogue signals - one for drum RPM and one for load - but I could be completely wrong about that too!

Last edited by phoenix; 23 Sep 2010 at 13:13.
phoenix is offline  
Quote
Old 23 Sep 2010, 19:28 (Ref:2763687)   #3
Chris Wilson
Racer
 
Join Date: Dec 2005
United Kingdom
Shropshire
Posts: 188
Chris Wilson should be qualifying in the top 10 on the grid
My pal used to be a Sun field engineer on RAM series rolling roads, and another pal has what I seem to remember as a RAM 11 or 12 currently installed. Send me your e-mail details to chris@chriswilson.tv and I'll get back to you with contact details for him. Are you in the UK?
Chris Wilson is offline  
__________________
Best regards,
Chris Wilson
Quote
Old 23 Sep 2010, 21:15 (Ref:2763739)   #4
WideOn
Rookie
 
Join Date: Sep 2010
Posts: 6
WideOn should be qualifying in the top 10 on the grid
right i tryed that way round on the card and it did kinda read but all over the place ........

there was no way of seeing where the wires was from

it kinda mad i did have the pc27e diagram and had a look and kinda got pin 3 to be right but it still all over the place on reading
WideOn is offline  
Quote
Old 26 Sep 2010, 10:16 (Ref:2764637)   #5
WideOn
Rookie
 
Join Date: Sep 2010
Posts: 6
WideOn should be qualifying in the top 10 on the grid
can anyone advice on what other software would work with then sun 12 and it at the right cash to set up as i think this one is very old win 98 and stuff please anyone help on know what is the best software to work with my rolling road run 12

thanks
WideOn is offline  
Quote
Old 26 Sep 2010, 10:45 (Ref:2764639)   #6
phoenix
Veteran
 
phoenix's Avatar
 
Join Date: Jul 2005
European Union
Posts: 1,981
phoenix should be qualifying in the top 5 on the gridphoenix should be qualifying in the top 5 on the grid
Apparently there is some alternative software - Piper CD 2000 ID DARR

Take a look here:

http://cgi.ebay.co.uk/Rolling-Road-D...-/290475838146

At the bottom, the guy says call him for info about the software which is available seperately:

http://www.piperdynamometers.com/rolling.htm
phoenix is offline  
Quote
Old 26 Sep 2010, 14:49 (Ref:2764830)   #7
WideOn
Rookie
 
Join Date: Sep 2010
Posts: 6
WideOn should be qualifying in the top 10 on the grid
yes i have seen that but im sure there gotta be onm the internet for me to try i have sene that site on ebay and did google it

thanks anyway any more ideas gimme a shout
WideOn is offline  
Quote
Old 26 Sep 2010, 14:57 (Ref:2764837)   #8
phoenix
Veteran
 
phoenix's Avatar
 
Join Date: Jul 2005
European Union
Posts: 1,981
phoenix should be qualifying in the top 5 on the gridphoenix should be qualifying in the top 5 on the grid
Quote:
Originally Posted by WideOn View Post
yes i have seen that but im sure there gotta be onm the internet for me to try
Could you translate that for me? I'm not sure what you mean...
phoenix is offline  
Quote
Old 26 Sep 2010, 21:56 (Ref:2765129)   #9
WideOn
Rookie
 
Join Date: Sep 2010
Posts: 6
WideOn should be qualifying in the top 10 on the grid
sorry my keyboard was playing up

ok i have seen that ebay ad about then with my rolling road and the piper software i was asking is there anywhere to get a demo if the software or somthing to try it

i am still looking for a system to work with my sun 12

any advice would be cool
WideOn is offline  
Quote
Old 26 Sep 2010, 22:06 (Ref:2765133)   #10
phoenix
Veteran
 
phoenix's Avatar
 
Join Date: Jul 2005
European Union
Posts: 1,981
phoenix should be qualifying in the top 5 on the gridphoenix should be qualifying in the top 5 on the grid
Quote:
Originally Posted by WideOn View Post
sorry my keyboard was playing up

ok i have seen that ebay ad about then with my rolling road and the piper software i was asking is there anywhere to get a demo if the software or somthing to try it

i am still looking for a system to work with my sun 12

any advice would be cool
Call Piper on this number and ask about a demo:

Tel: +44 1233 720130

OR

Speak to Simon on +44 7976 736 689
phoenix is offline  
Quote
Old 27 Sep 2010, 21:23 (Ref:2765757)   #11
WideOn
Rookie
 
Join Date: Sep 2010
Posts: 6
WideOn should be qualifying in the top 10 on the grid
that dont do upgrade sysytems now but it was wortha try


thanks any more ideas
WideOn is offline  
Quote
Old 26 Apr 2012, 01:52 (Ref:3065650)   #12
2F45T4U
Rookie
 
Join Date: Apr 2012
Posts: 1
2F45T4U should be qualifying in the top 10 on the grid
I know this is an old post now, but i have the connection information that may help (if you still want it)

cheers
2F45T4U is offline  
Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Advice needed,rolling road problem Copperbottom Racers Forum 22 27 Apr 2010 11:14
ROLLING ROAD SUN/MAHA RAM X11 2WD the-enginetuner Racing Technology 2 10 Oct 2009 22:48
rolling road tuning lynx ae Racers Forum 23 27 Feb 2009 11:18
Rolling Road Reccomendation Dan Friel Racing Technology 10 11 Aug 2003 12:04
Rolling road results spanner Road Car Forum 7 24 Jun 2003 00:13


All times are GMT. The time now is 21:19.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Original Website Copyright © 1998-2003 Craig Antil. All Rights Reserved.
Ten-Tenths Motorsport Forums Copyright © 2004-2021 Royalridge Computing. All Rights Reserved.
Ten-Tenths Motorsport Forums Copyright © 2021-2022 Grant MacDonald. All Rights Reserved.