View Single Post
Old 11 Jan 2011, 09:17 (Ref:2814087)   #26
Enrico Spaggiari
Rookie
 
Join Date: Aug 2008
Italy
Verona , Italy
Posts: 55
Enrico Spaggiari should be qualifying in the top 10 on the grid
Quote:
Originally Posted by FISCracer View Post

8.3.2.1.3 Roof reinforcement :
Compulsory for cars CT and GTS over 2000 cc
The upper part of the safety cage must comply with one of Drawings K-19, K-20 or K21.
The reinforcements may follow the curve of the roof.
For competitions without co-drivers, in the case of Drawing K-19 only, only one diagonal member may be fitted but its front connection must be on the driver’s side.
The ends of the reinforcements must be less than 100 mm from the junction between rollbars and members (not applicable to the top of the V formed by reinforcements in Drawings K-20 and K-21).
Hi everyone.
First of all, thanks for posting the link with new regs.
I have a question about the new rollbar rules. My car (Ford Mustang 1965) is fitted with a rollbar which has 1 diagonal member (drawing K-12), 1 doorbar on each side (drawing K-15) and no roof reinforcement (just main roof members). I had never have problems so far during scrutineering (both in Italy and Europe), so I am wondering if the new modifications (red text) of article 8.3.2 onwards (diagonal member for Ct and GT over 2.000cc- roof reinforcement- doorbars) apply to all periods of cars or from period F or....
Thank you fro your reply.
Kind regards.

Enrico
Enrico Spaggiari is offline  
Quote