View Single Post
Old 11 Feb 2019, 19:47 (Ref:3883329)   #5
Mike Bell
Ten-Tenths Hall of Fame
Veteran
 
Mike Bell's Avatar
 
Join Date: Sep 2008
England
Attleborough- 5 minutes from Snet!
Posts: 14,830
Mike Bell has a real shot at the championship!Mike Bell has a real shot at the championship!Mike Bell has a real shot at the championship!Mike Bell has a real shot at the championship!Mike Bell has a real shot at the championship!Mike Bell has a real shot at the championship!
Quote:
Originally Posted by Pete611 View Post
Sorry every one for not listing the parts. looking for front and rear shocks and possibly a radiator and a cross member on the engine cradle so far. I'm sure that the bushing's between the rear engine cradle and the plywood cockpit will need to be made.

Thank you again for any help
Thanks Pete, the dampers/ shocks would have been from one of the period manufacturers so should be easily replaceable. There’s several companies in the US and Europe that make them to order if given the necessary info / measurements to work from....

Regarding specific to the car parts, I can’t imagine anything you needs is going to be ‘off the shelf’, given how few of the cars were made. Radiator? Do you have something to copy, or, is it a case of starting from scratch? Do you have any photos to work from? There are many specialists on your or this side of the pond able to create a rad to any specification. Same with your chassis parts, I would think that they will have to be made from scratch.

Can you get access to any of the other Astras remaining? (I presume there are one or two...) Could be useful in assisting with your rebuild.
Mike Bell is offline  
__________________
Logic will get you from A to B. Imagination will take you everywhere. (Einstein)
Quote