Home Mobile Forum News Cookbook FaceBook Us T-Shirts etc.: Europe/Worldwide. eBay Motorsport Links Advertising  
Site Partners: SpotterGuides  
Related Sites: Your Link Here  

Go Back   TenTenths Motorsport Forum > Racing Talk > Racing Technology

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 19 Jun 2016, 05:15 (Ref:3652561)   #1
Join Date: Aug 2015
Posts: 13
sambeeb should be qualifying in the top 10 on the grid
clio RS w172 front ride height

A mate of mine is struggling to set up the front ride height of his w172 clio RS. It has wide track control arms with k tec camber adjustable bushes and the extra castor ball joint positions, k tec spherical tops, camber pins at the hub and bilstein coilovers. The LCA camber adjustable eccentrics are set at max for maximum track/neg camber and the ball joints are standard spec (not extended).
Aware that as a macpherson strut rule of thumb you don't want to lower the car to the extent that the lower control arms start to point up towards the ball joint side he set about sorting the ride height.
The problem he has found is that at stock ride height the lower control arms (when looking at the ball joint pivot and the front LCA pivot positions) are still tilting up slightly towards the ball joint side. He has to go 10mm over stock to get them near level but still not horizontal. Is this just something that's unique to these cars?
All I could think is that the car has a lot of anti lift/anti dive built into it and the rear LCA pivot is much higher than the front one and really what is needed is to find the axis that the LCA pivots on and then measure from the midpoint. Could that be the issue?
So basically how are you guys setting your ride heights/geometry on these cars?

sambeeb is offline  


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ride Height - Anglesey Libre Races diz Club Level Single Seaters 19 25 Nov 2007 13:38
Ride Height vs Downforce A. Mudge Racing Technology 9 11 Jun 2007 21:24
Ride height of F3 etc cars schomosport Club Level Single Seaters 45 30 Nov 2005 11:54
Ride height and spring rates ELANFAN Racing Technology 4 20 May 2002 13:55
effects of changing ride height sporty.dave Racing Technology 9 17 Mar 2002 23:37

Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 05:49.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Original Website Copyright © 1998-2003 Craig Antil. All Rights Reserved.
Ten-Tenths Motorsport Forums Copyright © 2004-2018 Royalridge Computing. All Rights Reserved.