Home  
Site Partners: SpotterGuides Veloce Books  
Related Sites: Your Link Here  

Go Back   TenTenths Motorsport Forum > Racing Talk > My Track Designs

Reply
 
Thread Tools Display Modes
Old 29 Apr 2016, 09:59 (Ref:3637059)   #1
kerb
Racer
 
Join Date: May 2014
Australia
canberra
Posts: 184
kerb should be qualifying in the top 10 on the grid
kerbs hand drawn

hey folks, kinda vanished for a bit there, but im back.

I had another thread that was less than successful and have given up on paint and sketch up. so, as the title implies, there will be hand drawn designs here. unfortunately, access to a scanner isn't possible just yet, so youll have to settle for photos for now.
kerb is offline  
__________________
"Craig Lowndes does it, on the day he farewells his friend" Bathurst 1000, 2006
Quote
Old 29 Apr 2016, 10:04 (Ref:3637061)   #2
kerb
Racer
 
Join Date: May 2014
Australia
canberra
Posts: 184
kerb should be qualifying in the top 10 on the grid
and so, here is track 1 in this new thread. running anti clockwise, I used a scale of 1cm=50m. the start/finish straight on bottom of the track is 18cm long
Attached Thumbnails
13092039_1698517863721052_6717943478163779522_n.jpg  
kerb is offline  
__________________
"Craig Lowndes does it, on the day he farewells his friend" Bathurst 1000, 2006
Quote
Old 30 Apr 2016, 19:10 (Ref:3637390)   #3
AoB Special Stage
Veteran
 
Join Date: Dec 2014
Estonia
Posts: 906
AoB Special Stage should be qualifying in the top 5 on the gridAoB Special Stage should be qualifying in the top 5 on the grid
vaguely reminded of COTA
AoB Special Stage is offline  
__________________
. . . but I'm not a traditionalist so maybe my opinion doesn't count! -TF110
Quote
Old 1 May 2016, 09:03 (Ref:3637471)   #4
kerb
Racer
 
Join Date: May 2014
Australia
canberra
Posts: 184
kerb should be qualifying in the top 10 on the grid
Quote:
Originally Posted by AoB Special Stage View Post
vaguely reminded of COTA
really?
kerb is offline  
__________________
"Craig Lowndes does it, on the day he farewells his friend" Bathurst 1000, 2006
Quote
Old 1 May 2016, 11:45 (Ref:3637494)   #5
ScotsBrutesFan
Race Official
Veteran
 
ScotsBrutesFan's Avatar
 
Join Date: Jul 2003
Scotland
West Lothian
Posts: 5,749
ScotsBrutesFan will be entering the Motorsport Hall of FameScotsBrutesFan will be entering the Motorsport Hall of FameScotsBrutesFan will be entering the Motorsport Hall of FameScotsBrutesFan will be entering the Motorsport Hall of FameScotsBrutesFan will be entering the Motorsport Hall of FameScotsBrutesFan will be entering the Motorsport Hall of FameScotsBrutesFan will be entering the Motorsport Hall of FameScotsBrutesFan will be entering the Motorsport Hall of FameScotsBrutesFan will be entering the Motorsport Hall of Fame
It very much reminds me of the type of angular designs that I used to do before I started using Sketch-up.
The area around T4 looks a little congested, I can't see enough detail of that area to judge whether there is enough run off.

Nice work all the same
ScotsBrutesFan is offline  
Quote
Old 3 May 2016, 08:56 (Ref:3638066)   #6
Yannick
Veteran
 
Join Date: Apr 2006
Posts: 2,107
Yannick should be qualifying in the top 10 on the grid
You have chosen a nice color scheme. The track has got enough straights with tight corners at their end to provide overtaking. But it is very stop-and-go due to a rather high number of sharp corners with a small radius. I guess it is this type of character that you were going for. I think you have achieved that a driver can get into a rhythm easily in spite of this. Bureau Tilke would be proud if they had come up with the design. It could be quite good, given undulating terrain in the right places. Yet, drivers would probably still complain about the many tight corners.
Thank you for this interesting study in track character. I like it when a track does not have "a bit of everything" but a distinct character instead.

Last edited by Yannick; 3 May 2016 at 09:09.
Yannick is offline  
Quote
Old 3 May 2016, 09:41 (Ref:3638074)   #7
kerb
Racer
 
Join Date: May 2014
Australia
canberra
Posts: 184
kerb should be qualifying in the top 10 on the grid
Quote:
Originally Posted by ScotsBrutesFan View Post
It very much reminds me of the type of angular designs that I used to do before I started using Sketch-up.
The area around T4 looks a little congested, I can't see enough detail of that area to judge whether there is enough run off.

Nice work all the same

with the 1:50000 scale, the turn 4 run off is 50m
kerb is offline  
__________________
"Craig Lowndes does it, on the day he farewells his friend" Bathurst 1000, 2006
Quote
Old 3 May 2016, 10:16 (Ref:3638077)   #8
kerb
Racer
 
Join Date: May 2014
Australia
canberra
Posts: 184
kerb should be qualifying in the top 10 on the grid
thanks to all for your feedback, I shall now reveal track 2.

using the same 1cm=50m scale, the straight at the very bottom is 15cm, or around 750m
Attached Thumbnails
13083260_1700306710208834_5509412554670688716_n.jpg  
kerb is offline  
__________________
"Craig Lowndes does it, on the day he farewells his friend" Bathurst 1000, 2006
Quote
Old 21 May 2016, 06:05 (Ref:3643373)   #9
kerb
Racer
 
Join Date: May 2014
Australia
canberra
Posts: 184
kerb should be qualifying in the top 10 on the grid
ok, a little disappointed by lack of response, but anyway, moving on

track 3 is another track using the 1cm=50m scale, the start/finish straight is 11cm, or 550m
Attached Thumbnails
13237856_1706675966238575_7846421607401981319_n.jpg  
kerb is offline  
__________________
"Craig Lowndes does it, on the day he farewells his friend" Bathurst 1000, 2006
Quote
Old 21 May 2016, 06:09 (Ref:3643374)   #10
kerb
Racer
 
Join Date: May 2014
Australia
canberra
Posts: 184
kerb should be qualifying in the top 10 on the grid
and yes, I am aware of the error involving pit in and the outside sweeper, competitors will have to negotiate the chicane to enter pit lane
kerb is offline  
__________________
"Craig Lowndes does it, on the day he farewells his friend" Bathurst 1000, 2006
Quote
Old 21 May 2016, 06:20 (Ref:3643375)   #11
kerb
Racer
 
Join Date: May 2014
Australia
canberra
Posts: 184
kerb should be qualifying in the top 10 on the grid
track 4 on the other hand is one of the shortest non karting track in my collection, using a scale of 1cm=25m, giving the S/F straight a length of 11cm(275m). I have divided the track into 3 sectors, sector 1 ending between 4&5, sector 2 ending just after 7, with sector 3 completing the lap
Attached Thumbnails
13221710_1706675996238572_954560447390007342_n.jpg  
kerb is offline  
__________________
"Craig Lowndes does it, on the day he farewells his friend" Bathurst 1000, 2006
Quote
Old 3 Jun 2016, 15:16 (Ref:3646895)   #12
ScotsBrutesFan
Race Official
Veteran
 
ScotsBrutesFan's Avatar
 
Join Date: Jul 2003
Scotland
West Lothian
Posts: 5,749
ScotsBrutesFan will be entering the Motorsport Hall of FameScotsBrutesFan will be entering the Motorsport Hall of FameScotsBrutesFan will be entering the Motorsport Hall of FameScotsBrutesFan will be entering the Motorsport Hall of FameScotsBrutesFan will be entering the Motorsport Hall of FameScotsBrutesFan will be entering the Motorsport Hall of FameScotsBrutesFan will be entering the Motorsport Hall of FameScotsBrutesFan will be entering the Motorsport Hall of FameScotsBrutesFan will be entering the Motorsport Hall of Fame
I've taken one of your designs and imported it into SKetchup

The reason for doing this is to help you understand your scaling better.

For length the track measures out at 5.356km which is not bad at all.

However as you'll notice I've narrowed your track down by about half. Your track was about 28m wide pretty much everywhere, and wider still in bits.

In Sketchup I usually do my circuit 14.5m wide, and so that's what I've shown on yours.
This also shows the pitlane sizes. I know you made comment about an error in the pits, I've taken what I thought you meant to have a direct access from after the chicane.
The point being that the pitlane itself needs only to be 2 cars wide, so around 4m is what I use.

As I've posted before, these aren't bad designs, don't be disheartened by a lack of response. My Tracks isn't getting a lot of traffic at the moment, but keep putting designs up they are being looked at.
Attached Thumbnails
Kerb import scale.jpg   Kerb pit lane.jpg  
ScotsBrutesFan is offline  
Quote
Old 4 Jun 2016, 04:41 (Ref:3647041)   #13
kerb
Racer
 
Join Date: May 2014
Australia
canberra
Posts: 184
kerb should be qualifying in the top 10 on the grid
Quote:
Originally Posted by ScotsBrutesFan View Post
For length the track measures out at 5.356km which is not bad at all.

However as you'll notice I've narrowed your track down by about half. Your track was about 28m wide pretty much everywhere, and wider still in bits.
ok, I should probably point out before I release any more is that the scale only affects the length of a circuit, not the width, thanks for bringing that to my attention SBF
kerb is offline  
__________________
"Craig Lowndes does it, on the day he farewells his friend" Bathurst 1000, 2006
Quote
Old 8 Jul 2016, 10:44 (Ref:3657646)   #14
kerb
Racer
 
Join Date: May 2014
Australia
canberra
Posts: 184
kerb should be qualifying in the top 10 on the grid
track 5 is actually a part of a bus route that I saw and drew up

its scale is 1cm=25m, with the front straight being 10cm, or 250m
Attached Thumbnails
13592765_1723306221242216_2740148882306342180_n.jpg  
kerb is offline  
__________________
"Craig Lowndes does it, on the day he farewells his friend" Bathurst 1000, 2006
Quote
Old 26 Sep 2016, 04:26 (Ref:3675192)   #15
kerb
Racer
 
Join Date: May 2014
Australia
canberra
Posts: 184
kerb should be qualifying in the top 10 on the grid
track 6 time, after a little while

the scale is 1cm=25m and the start/finish straight is 12cm, or 300m
Attached Thumbnails
13557677_1723306257908879_8722752975995639009_n.jpg  
kerb is offline  
__________________
"Craig Lowndes does it, on the day he farewells his friend" Bathurst 1000, 2006
Quote
Old 23 Jan 2017, 06:02 (Ref:3704387)   #16
kerb
Racer
 
Join Date: May 2014
Australia
canberra
Posts: 184
kerb should be qualifying in the top 10 on the grid
sorry for the gap between tracks 6 & 7, but here is track 7. may be better for bikes than cars, but should be functional for both. runs counter clockwise. scale is 1cm=50m, with the s/f straight being 11cm (550m)
Attached Thumbnails
14462983_1755758671330304_8319261736776131159_n.jpg  

Last edited by kerb; 23 Jan 2017 at 06:06. Reason: forgot the scale
kerb is offline  
__________________
"Craig Lowndes does it, on the day he farewells his friend" Bathurst 1000, 2006
Quote
Old 24 Jan 2017, 06:06 (Ref:3704660)   #17
kerb
Racer
 
Join Date: May 2014
Australia
canberra
Posts: 184
kerb should be qualifying in the top 10 on the grid
track 8 is a set of streets modified into a figure 8 circuit. ive measured it out by driving around it and it comes to a length of 6.2km, but may be shorter when the roundabouts are taken out of the equation. the north start/finish line will be the main s/f point on the combined circuit. the north section will be clockwise, and is quite hilly.
Attached Thumbnails
16143447_1809846315921539_7108197279539596155_o.jpg  
kerb is offline  
__________________
"Craig Lowndes does it, on the day he farewells his friend" Bathurst 1000, 2006
Quote
Old 24 Jan 2017, 06:49 (Ref:3704667)   #18
kerb
Racer
 
Join Date: May 2014
Australia
canberra
Posts: 184
kerb should be qualifying in the top 10 on the grid
for those wanting to take a tour of track 8 on google maps here are the streets to find
Attached Thumbnails
Screenshot (5).png  
kerb is offline  
__________________
"Craig Lowndes does it, on the day he farewells his friend" Bathurst 1000, 2006
Quote
Old 22 Feb 2017, 11:20 (Ref:3713958)   #19
kerb
Racer
 
Join Date: May 2014
Australia
canberra
Posts: 184
kerb should be qualifying in the top 10 on the grid
ok, releasing a few today, starting with track 9
a fairly short one, with a scale of 1cm=25m, the front straight being 13cm (325m), runs anti clockwise.
Attached Thumbnails
16864341_1823239284582242_5374555017854240059_n.jpg  
kerb is offline  
__________________
"Craig Lowndes does it, on the day he farewells his friend" Bathurst 1000, 2006
Quote
Old 22 Feb 2017, 11:29 (Ref:3713961)   #20
kerb
Racer
 
Join Date: May 2014
Australia
canberra
Posts: 184
kerb should be qualifying in the top 10 on the grid
track 10 has a north and south variant that can be run at the same time. scale is 1cm=40m, with the southern front straight being 10cm (400m), the gap between the north and south circuit is about 50m, which could be an issue now that I think about it. both run anticlockwise.
Attached Thumbnails
16904775_1823239451248892_3456541404043421912_o.jpg  
kerb is offline  
__________________
"Craig Lowndes does it, on the day he farewells his friend" Bathurst 1000, 2006
Quote
Old 22 Feb 2017, 11:40 (Ref:3713963)   #21
kerb
Racer
 
Join Date: May 2014
Australia
canberra
Posts: 184
kerb should be qualifying in the top 10 on the grid
the third and final circuit is, you guessed it, track 11. more of a top end speed kind of circuit with 5 straights over 400m. with a scale of 1cm=40m, the front straight is 17cm (680m). like the other circuits today, this one runs anti clockwise.
Attached Thumbnails
16649183_1823239537915550_4482128774310106465_n.jpg  
kerb is offline  
__________________
"Craig Lowndes does it, on the day he farewells his friend" Bathurst 1000, 2006
Quote
Old 15 Mar 2017, 09:42 (Ref:3718745)   #22
kerb
Racer
 
Join Date: May 2014
Australia
canberra
Posts: 184
kerb should be qualifying in the top 10 on the grid
track 12-19 are old designs, I think 4-8 years ago when I was 11-15, that I polished up added run off and better pit ins and outs to. I'll release these at different intervals while I go through other oldies to polish up so I don't run out of content
kerb is offline  
__________________
"Craig Lowndes does it, on the day he farewells his friend" Bathurst 1000, 2006
Quote
Old 15 Mar 2017, 09:52 (Ref:3718747)   #23
kerb
Racer
 
Join Date: May 2014
Australia
canberra
Posts: 184
kerb should be qualifying in the top 10 on the grid
track 12 really came from a vision of turns 2-4 being steep downhill and I kind of grew the circuit around that section. the front straight is 500m long and it runs clockwise.
Attached Thumbnails
17201354_1832811516958352_3240159413052099913_n.jpg  
kerb is offline  
__________________
"Craig Lowndes does it, on the day he farewells his friend" Bathurst 1000, 2006
Quote
Old 15 Mar 2017, 21:20 (Ref:3718896)   #24
kerb
Racer
 
Join Date: May 2014
Australia
canberra
Posts: 184
kerb should be qualifying in the top 10 on the grid
track 13 is another oldie. running anti clockwise it has a length of 3.5km. turn 1 is the widest part of the circuit.
Attached Thumbnails
17264723_1832811623625008_1878187995789040883_n.jpg  
kerb is offline  
__________________
"Craig Lowndes does it, on the day he farewells his friend" Bathurst 1000, 2006
Quote
Old 21 Mar 2017, 08:01 (Ref:3720369)   #25
kerb
Racer
 
Join Date: May 2014
Australia
canberra
Posts: 184
kerb should be qualifying in the top 10 on the grid
track 14, its short. running anti clockwise, the scale is 1cm=20cm. the front straight is 15cm (300m). T1 has 5 degree banking. blue kerb on hairpin is inverted.
Attached Thumbnails
17342933_1832811700291667_2004239942604286950_n.jpg  
kerb is offline  
__________________
"Craig Lowndes does it, on the day he farewells his friend" Bathurst 1000, 2006
Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Thuxton kerbs jordan81 Bike Racing 5 30 May 2011 14:02
GT2 - battle lines drawn - the ACO declares war............ Bentley03 ACO Regulated Series 42 26 Mar 2010 21:25
Monza kerbs olly83 Formula One 45 14 Sep 2009 02:51


All times are GMT. The time now is 23:10.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Original Website Copyright © 1998-2003 Craig Antil. All Rights Reserved.
Ten-Tenths Motorsport Forums Copyright © 2004-2021 Royalridge Computing. All Rights Reserved.
Ten-Tenths Motorsport Forums Copyright © 2021-2022 Grant MacDonald. All Rights Reserved.