|
||||||||||
|
||||||||||
19 Feb 2016, 10:58 (Ref:3615950) | #1 | ||
Veteran
Join Date: Sep 2003
Posts: 1,074
|
Using HANS (aka Frontal Head Restraint, FHR)
After my first rally this year, I posted about competitors NOT using their HANS/FHR properly - under Historics. But I think it applies to all motor sport, as we all have to start using them.
My message was to get someone else to check that your tethers are correctly secured, before you set off, especially when you are getting used to the fiddly clips. See: http://tentenths.com/forum/showthread.php?t=146452 John |
||
|
22 Feb 2016, 10:25 (Ref:3616681) | #2 | ||
Veteran
Join Date: Dec 2002
Posts: 3,364
|
UPDATE. Out on SS1 of the Red Kite Rally yesterday. Position just as bad as the previous rally but the organisers had stationed a scrutineer (actually a Technical Commissioner) at the start to check on things. Actually things were a bit of a shambles due to so many crews arriving unready to start. I estimate that at least 30% of crews had FHRs not fitted correctly, helmet straps not done up or other dangerous deficiencies.
That was in spite of the organisers having emphasised the issues at scrutineering. Also notable was the incompatibility between the 3" belts used by most rally drivers and the HANS/Simpson versions worn which were for 2" belts. There is a whole list of other problems. I'm sure the scrutineer will be taking these up with the MSA. Regards Jim |
||
__________________
Life is not safe, just choose where you want to take the risks. |
22 Feb 2016, 10:53 (Ref:3616692) | #3 | ||
Veteran
Join Date: Dec 2002
Posts: 3,364
|
Further:
It was abundantly clear that most of the drivers using the Simpson Hybrid device had not followed the instructions for adjusting the tethers contained in this: https://simpsonraceproducts.com/pdf/...ion_Manual.pdf Regards Jim |
||
__________________
Life is not safe, just choose where you want to take the risks. |
22 Feb 2016, 14:57 (Ref:3616737) | #4 | ||
Veteran
Join Date: Apr 2004
Posts: 3,824
|
Jim can you elaborate on this please as I've never heard this before; on the contrary I've read in lots of places that it's perfectly OK to use 3" straps with HANS (which is what I do, with no apparent problems).
|
||
__________________
a salary slave no more... |
22 Feb 2016, 15:04 (Ref:3616741) | #5 | |||
Race Official
Veteran
Join Date: Mar 2003
Posts: 10,356
|
Quote:
We use 3" belts too - I think the issue relates to the Simpson hybrid HANS thingy rather than the 'standard' HANS device but Jim can probably clear that up. |
|||
|
22 Feb 2016, 15:22 (Ref:3616745) | #6 | ||
Veteran
Join Date: Dec 2002
Posts: 3,364
|
Yes mainly the Simpson device but some HANS (there are many models, old and new) had 3" belts resting on either of the two edges.
This may not matter but did have a tendency to make belts difficult to do up really tightly. Regards Jim |
||
__________________
Life is not safe, just choose where you want to take the risks. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Using HANS (aka Frontal Head Restraint, FHR) | JohnD | Historic Racing Today | 47 | 5 Mar 2016 18:37 |
Frontal Head Restraints | Mike Bell | Historic Racing Today | 124 | 3 Jan 2015 17:19 |