Site Partners: SpotterGuides Veloce Books  
Related Sites: Your Link Here  

Go Back   TenTenths Motorsport Forum > Racing Talk > Racers Forum

Thread Tools Display Modes
Old 6 Oct 2021, 04:55 (Ref:4077136)   #1
Andrew Flynn
Join Date: Oct 2021
Posts: 3
Andrew Flynn should be qualifying in the top 10 on the grid
Brands camber setup

I’m running in the MX5 supercup

Does anyone have advice on rear camber settings for Brands Hatch?

Front and rear are limited to max manufacturer spec which is -1.5 degrees. I have front set to -1.5 and rear set to -.5 so i get good traction out of corners.
Cold tyre pressures 26 front, 26.5 rear

This is giving me 56.4 on old tyres which i think will be around too 10 times of 55.4 with new tyres in dry.

Here’s how the car handles on those settings around Brands Hatch. Dry day 22 degrees c.

Andrew Flynn is offline  
Old 29 Nov 2021, 10:53 (Ref:4085860)   #2
Gerard C
Join Date: May 2013
My place
Posts: 9,216
Gerard C has a real shot at the podium!Gerard C has a real shot at the podium!Gerard C has a real shot at the podium!Gerard C has a real shot at the podium!
Never raced any MX at Brands but lately I tried to run it with few camber at rear and almost toe out. It doesnt work at all! Went back to maximum neg camber front and rear and toe at zero because the 1,6 engine is not a monster. In a one make series you must compromize…

What kind of lsd are you using? Your rules state:"The final drive may be equipped with either open or limited slip differential but must be original Mazda equipment. Modifications of any type are not permitted. So Kaaz, OS Giken, Gripper, 3JD are allowed?
Gerard C is offline  
Toyota: l'esprit de Lexus l'habite. L'horizon c'est loin,surtout vers la fin! Si ma tante en avait, on l'appellerait tonton. How do you do yau d'poele is a poor joke!

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How much camber? ozracer Racing Technology 47 13 Sep 2007 07:41
Peugeot 205 Camber angles. Hog Racing Technology 2 14 Apr 2003 12:30
Positive camber on very old race cars simpson Racing Technology 2 19 Sep 2001 16:57
Positive camber used in old race cars - why? simpson Motorsport History 2 19 Sep 2001 16:54
Wheel Camber Simon Harvey Racing Technology 11 5 Aug 2001 13:30

All times are GMT. The time now is 17:04.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2023, vBulletin Solutions Inc.
Original Website Copyright © 1998-2003 Craig Antil. All Rights Reserved.
Ten-Tenths Motorsport Forums Copyright © 2004-2021 Royalridge Computing. All Rights Reserved.
Ten-Tenths Motorsport Forums Copyright © 2021-2022 Grant MacDonald. All Rights Reserved.