Home  
Site Partners: SpotterGuides Veloce Books  
Related Sites: Your Link Here  

Go Back   TenTenths Motorsport Forum > Racing Talk > Racing Technology

Reply
 
Thread Tools Display Modes
Old 6 Jun 2007, 09:06 (Ref:1930028)   #1
A. Mudge
Rookie
 
Join Date: Aug 2005
Guernsey
Cardiff
Posts: 41
A. Mudge should be qualifying in the top 10 on the grid
Ride Height vs Downforce

When going to a Hill climb in the season, a topic of conversation came up about Ride Heights and Downforce. Having an understanding of the ride height side of things, one thing I would like to know is that is there an equation which works out what level of downforce is going over the back wing if the car is doing a certain speed.

For Instance: if a car is racing at 100mph is there an equation which will show the weight of the downfoce which is being pushed on the back wing????

Any thoughts?
A. Mudge is offline  
Quote
Old 6 Jun 2007, 09:20 (Ref:1930044)   #2
Raglanparade
Veteran
 
Join Date: Jan 2004
Australia
Posts: 2,382
Raglanparade should be qualifying in the top 10 on the grid
I dont think there would be an accurate equation, as this would depend on the density of the air flowing over the wind.

I would suggest that at circuits at sea level (where the air is most dense) it would have the most effect on ride height. At high altitude, it will have a lesser effect.

During a Hill climb, it would be possible for a car to ride lower at the bottom, and higher at the top with the same suspension calibration (depending on how long the climb to the top is). This effect would be minimal (probably only 1mm, and would depend on the amount of downforce used on the car).
Raglanparade is offline  
__________________
... without motorsport, what is sport?
Quote
Old 6 Jun 2007, 09:40 (Ref:1930059)   #3
Rockmunky
Veteran
 
Rockmunky's Avatar
 
Join Date: Aug 2005
England
'artfordshire
Posts: 1,964
Rockmunky should be qualifying in the top 10 on the gridRockmunky should be qualifying in the top 10 on the grid
Yup, i think that's also why races in high altitude locations need to run more wing than what they would if they were in Holland, for example.
Rockmunky is offline  
__________________
Hah!
Quote
Old 6 Jun 2007, 10:09 (Ref:1930080)   #4
FPV GTHO
Veteran
 
Join Date: Jul 2005
Australia
St Marys, NSW
Posts: 2,246
FPV GTHO should be qualifying in the top 10 on the grid
Quote:
Originally Posted by 109E - Guess
For Instance: if a car is racing at 100mph is there an equation which will show the weight of the downfoce which is being pushed on the back wing????
You couldnt accurately tell without testing. You'd need wing speed, pressure, temperature, wing angle etc as it all affects the force generated.
FPV GTHO is offline  
Quote
Old 6 Jun 2007, 18:24 (Ref:1930499)   #5
Dutton
Veteran
 
Dutton's Avatar
 
Join Date: Oct 2002
United Nations
Not Much North of Montana
Posts: 6,760
Dutton has a real shot at the podium!Dutton has a real shot at the podium!Dutton has a real shot at the podium!Dutton has a real shot at the podium!
But there must be some form of relationship between these variables and the product, which can then be expressed (if the value of the variables alters, then the result changes - but this will alter as according to the relationship between said variables and the product).

So, like, if we had the variable set [a,b,c,d,e,f,g], with each letter representing some downforce-affecting-thing, and with [x] as downforce-produced, then an equation could exist.

x = [a*b/e]*b-[g/c]/ga+f*[dae/fg]

Clearly, the above is an entirely arbitrary formulation. My point is there must be some kind of equation (well, more likely some kind of complex equation matrix - or something) that represents these things.

Life would be pretty difficult with regards development if there wasn't some kind of means like this to assist the process.

Still, there remains nothing quite like actual running to test the product of the theories.

Last edited by Dutton; 6 Jun 2007 at 18:31.
Dutton is offline  
__________________
"The world is my country, and science is my religion."
- Christian Huygens: 17th century Dutch astronomer.
Quote
Old 6 Jun 2007, 19:25 (Ref:1930568)   #6
Locost47
Racer
 
Join Date: Apr 2006
England
Posts: 185
Locost47 should be qualifying in the top 10 on the grid
Although it seems simple it really isn't a straightforward question this. There *is* a formula for calculating what downforce is acting on your car at any given speed *but* you need to kinow the lift coefficient of the car in that partiuclar configuration in order to work it out. The lift coefficient is a "shape factor", which is kind of like a score for how much downforce an item or vehicle generates.

ok, for the more pedantically minded, it physically represents the proportion of the momentum of a mass of air of the same cross-sectional area as the vehicle which is converted into vertical force on the vehicle. For the even more pedantic, yes, you can get coefficients greater than 1 but that doesn't break Newton's laws, it just means that the area affected by the vehicle is greater than its geometric x-sectional area.

The effective lift coefficient of your car will vary with wing settings, ride heights and at least a dozen other things, in such a complicated way that there will be no analytical formula for it. You have to directly measure it, either by load cells in your wing mounts/suspension or ride height monitoring or in a wind tunnel.

Once you have a lift coefficient for the car in the posture you want to know about, you can calculate the force easily enough by using this formula:

Downforce = 0.5 * (air density )* (speed in m/sec)^2 * (car's frontal area in sqm) * (Lift coefficient)

Air density is roughly 1.1-1.3kg/m^3 over a realistic range of altitudes & temperatures and 100mph is 44.4m/sec.

Unfortunately since knowing the lift coefficient is the really critical but i'm not sure how helpful any of that actually is. Sorry.
Locost47 is offline  
Quote
Old 6 Jun 2007, 20:40 (Ref:1930617)   #7
tristancliffe
Veteran
 
tristancliffe's Avatar
 
Join Date: Dec 2005
United Kingdom
Norwich, UK
Posts: 1,164
tristancliffe should be qualifying in the top 10 on the gridtristancliffe should be qualifying in the top 10 on the grid
And the bodywork/suspension/exhaust etc in front or around the wing will have a measureable effect on the 'efficiency' of the wing.
tristancliffe is offline  
__________________
Dallara F307 Toyota, MSV F3 Cup - Class and Team Champion 2012
Monoposto Champion 2008, 2010 & 2011.
Quote
Old 6 Jun 2007, 21:34 (Ref:1930662)   #8
AU N EGL
Veteran
 
AU N EGL's Avatar
 
Join Date: Jul 2006
United States
Raleigh, North Carolina
Posts: 4,418
AU N EGL should be qualifying in the top 10 on the gridAU N EGL should be qualifying in the top 10 on the grid
Here is an example:

Aerodynamic Test and Development of the Corvette
SAE Technical Papers

Title: Aerodynamic Test and Development of the Corvette C5 for Showroom Stock Racing
Document Number: 2002-01-3333
Author(s):
Larry Alan Kubes - GM Racing
James Ric Spaulding - GM Racing
Dwight Woodbridge - GM Racing
Abstract:
This paper documents a one shift (10 hour) wind tunnel test program conducted on a Corvette C5 prepared for Sports Car Club of America (S.C.C.A.) World Challenge racing. The testing was conducted at the Canadian National Research Center in Ottawa, Canada. Specific areas of test included front fascia and under tray, rear air discharge, rear wing configuration and angle, B-pillar configuration, and ride height. Standard wind tunnel test procedures were followed. In total twenty-six separate configurations were evaluated. Data for front and rear lift, total drag, and lift/drag (L/D) ratio are provided for each test configuration. The cumulative effects of the aerodynamic changes evaluated in his program, calculated at 192 KPH (120 MPH), increased front down force by 318 N (72 Lb.), and rear down force by 770 N (173 Lb.). Lift/drag ratio was improved from -0.597 to -1.016. These changes increased total drag by 381 N (86 Lb.). Further testing lowering ride height 2.5 cm rear and 5.0 cm front reduced drag by 326 N (73 Lb.) and resulted in a L/D ratio of -1.247. Although data are specific to the Corvette C5, the general principles studied may be applied to any production-based racecar. These modifications should be validated on the racetrack prior to competing to ensure the handling balance can be optimized for the driver and car combination.
File Size: 2642K
Product Status: In Stock
Included in: PT-118
AU N EGL is offline  
__________________
"When the fear of death out weighs the thrill of speed, brake." LG
Quote
Old 6 Jun 2007, 22:02 (Ref:1930696)   #9
Speedy1
Rookie
 
Join Date: May 2007
United Nations
100km north of San Fransisco
Posts: 47
Speedy1 should be qualifying in the top 10 on the grid
ride height

A question that can not be answered with out knowing something about the vehicle
current issue of Race Tech has an article on this topic showing how to do simple tests with the car on a smooth flat road to arrive at some reasonable estimates of total downforce
Speedy1 is offline  
Quote
Old 11 Jun 2007, 20:24 (Ref:1934357)   #10
JohnD
Veteran
 
JohnD's Avatar
 
Join Date: Sep 2003
Location:
North West UK
Posts: 1,074
JohnD should be qualifying in the top 5 on the gridJohnD should be qualifying in the top 5 on the grid
"Race car Aerodynamics" By Prof. J.Katz (Pub.Bentley) deals with ride height in chapter 6. He shows that a front wing will achieve double the downforce of the wing alone if the ride height over chord ratio (h/c) is less than 0.3.

Elsewhere in his book, he says that "ffor ground clearance of less than h/c=0.5, the lift can easily increase by 50%"

But he also makes the point made above - airflow is dependent on so many other factors, in and around the car, that an absolute relationship is impossible.

I recommend his book to anyone with an interest in car aero.
John
JohnD is offline  
Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ride height of F3 etc cars schomosport Club Level Single Seaters 45 30 Nov 2005 11:54
Ride height and spring rates ELANFAN Racing Technology 4 20 May 2002 12:55
effects of changing ride height sporty.dave Racing Technology 9 17 Mar 2002 23:37
Is this the height of bad taste? KC Road Car Forum 14 10 Jun 2001 12:27


All times are GMT. The time now is 08:23.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Original Website Copyright © 1998-2003 Craig Antil. All Rights Reserved.
Ten-Tenths Motorsport Forums Copyright © 2004-2021 Royalridge Computing. All Rights Reserved.
Ten-Tenths Motorsport Forums Copyright © 2021-2022 Grant MacDonald. All Rights Reserved.