Home  
Site Partners: SpotterGuides Veloce Books  
Related Sites: Your Link Here  

Go Back   TenTenths Motorsport Forum > Saloon & Sportscar Racing > National & Club Racing

Reply
 
Thread Tools Display Modes
Old 21 Jun 2019, 20:17 (Ref:3913385)   #1
Lord Mr Ford.
Rookie
 
Join Date: Jun 2019
Wales
North Wales.
Posts: 6
Lord Mr Ford. should be qualifying in the top 10 on the grid
Good evening all many thanks for letting me join the forums.

Evening how's everyone doing cheers for leeting join the group my dave's and I'm from North Wales UK only up the road from the Anglesey race circuit.

Right where the action is.



Anyone having a few tonight.

Here's my pride and joy and also will some help and advise regarding my build as I too want too compete in circuit racing as well.

Have started on it but at the same time I've hit a bit of a brick wall regarding the roll cages getting for a Ford probe isn't easy unless I buy from the states again not if they Qualify for our MSA/FIA standards as there's might be different to ours still learning still and enjoying the experience.





Lord Mr Ford. is offline  
Quote
Old 26 Jun 2019, 15:36 (Ref:3914293)   #2
Lancsbreaker
Veteran
 
Lancsbreaker's Avatar
 
Join Date: Jun 2009
England
Padiham, Lancashire
Posts: 4,004
Lancsbreaker has a real shot at the podium!Lancsbreaker has a real shot at the podium!Lancsbreaker has a real shot at the podium!Lancsbreaker has a real shot at the podium!
Hi - will be racing at Anglesey with CSCC in a few weeks - come and see us!


There are a number of firms who will custom-build a cage for you, but of course at a cost....eg https://www.customcages.co.uk/bespoke-roll-cage-service , and of course Safety Devices, who have just built one for a friend's Alfa 4C....


I would have thought that a cage meeting US requirements would be OK, but it would be wise to check with Motorsport UK before shopping across the Atlantic
Lancsbreaker is offline  
__________________
Richard Murtha: You don't stop racing because you are too old, you get old when you stop racing! But its looking increasingly likely that I've stopped.....have to go back to rallying ;)
Quote
Old 26 Jun 2019, 16:03 (Ref:3914299)   #3
VIVA GT
Veteran
 
VIVA GT's Avatar
 
Join Date: Apr 2005
England
Leicestershire
Posts: 5,638
VIVA GT is going for a new world record!VIVA GT is going for a new world record!VIVA GT is going for a new world record!VIVA GT is going for a new world record!VIVA GT is going for a new world record!VIVA GT is going for a new world record!VIVA GT is going for a new world record!VIVA GT is going for a new world record!
As Richard has said, welcome to the forums. I'm sure you'll have fun and learn a lot from the bunch on here, just don't take everything to heart what people say, reading things on a forum is a lot different to hearing how someone says it!
Just a quick thought on an American roll cage. A basic thought I know, but if you do go down that route, make sure that the design is going to be suitable for a right had drive car, you don't want a strengthening brace going through where your drivers seat is!
VIVA GT is online now  
__________________
Incognito: An Italian phrase meaning Nice Gearchange!
Quote
Old 26 Jun 2019, 20:39 (Ref:3914338)   #4
Lord Mr Ford.
Rookie
 
Join Date: Jun 2019
Wales
North Wales.
Posts: 6
Lord Mr Ford. should be qualifying in the top 10 on the grid
Quote:
Originally Posted by Lancsbreaker View Post
Hi - will be racing at Anglesey with CSCC in a few weeks - come and see us!


There are a number of firms who will custom-build a cage for you, but of course at a cost....eg https://www.customcages.co.uk/bespoke-roll-cage-service , and of course Safety Devices, who have just built one for a friend's Alfa 4C....


I would have thought that a cage meeting US requirements would be OK, but it would be wise to check with Motorsport UK before shopping across the Atlantic
Quote:
Originally Posted by VIVA GT View Post
As Richard has said, welcome to the forums. I'm sure you'll have fun and learn a lot from the bunch on here, just don't take everything to heart what people say, reading things on a forum is a lot different to hearing how someone says it!
Just a quick thought on an American roll cage. A basic thought I know, but if you do go down that route, make sure that the design is going to be suitable for a right had drive car, you don't want a strengthening brace going through where your drivers seat is!
Just caught up with this now cheers for the warm welcome much Appreciated been away for a few days.

Thanks too the lads at Escort powers in Caernarfon they've got in touch with custom cages and will be contacting regarding price and transportation as well.

Will need too strip of the car tho doors, bonnet boot glass wiring loom etc.
There's no information at all regarding the ford probe in terms of racing unless you look at nascar or other US related races.

The main thing is that I'll get a certificate and will be proof too the FIA/MSA that work carried out is approved too high standard.

I'll be at Anglesey this weekend for the track day events as well the rally as well.

If you see me in the work van or the ford probe you know I'm there.


Lord Mr Ford. is offline  
Quote
Old 26 Jun 2019, 21:22 (Ref:3914341)   #5
Lord Mr Ford.
Rookie
 
Join Date: Jun 2019
Wales
North Wales.
Posts: 6
Lord Mr Ford. should be qualifying in the top 10 on the grid
I forgot too add this on my last post.

There's some information I forgot too mention on my last post.

Its regarding the car its self, Normally with racing people choose the cars then choose a championship too compete in, While as for me the car kinda choose me.

I've had it for many years and I just love these cars, sure drive is the wrong place wish it was RWD as originally intended in the states instead Mazda went beep it and go FWD instead.

Cheaper and cost affective could be the mustang as the shell and chassis was designed for the 4.6 V8 they were going too use.

What Comps if I was too race properly would my ford probe be able too compete in? I was thinking along the lines of classics as there pretty rare and bhp and toque is on par same as for instance ford Capri 2.8.

Also rules and regulations what's required in terms of health and safety and of course parts for the build things I have too have installed.

know of the fuel cut of switches and battery cut off switches are required.

An do of course what modifications are legal or illegal may case bonnet scoop fully functional which I want too add but not bought it yet incase of regulations.
Lord Mr Ford. is offline  
Quote
Old 26 Jun 2019, 21:28 (Ref:3914344)   #6
andrewc
Veteran
 
andrewc's Avatar
 
Join Date: Sep 2006
Location:
Norwich, UK
Posts: 946
andrewc should be qualifying in the top 10 on the grid
overseas shipping on a cage from us would be fairly pricey due to the volume unless you can get it sent over with other stuff - plus with import duty and vat on entry you may find it works out easier to get a cage custom made here.
andrewc is offline  
__________________
Andrew Cliffe - Norwich Photo & Racing Exposure
Quote
Old 27 Jun 2019, 08:33 (Ref:3914392)   #7
andrewc
Veteran
 
andrewc's Avatar
 
Join Date: Sep 2006
Location:
Norwich, UK
Posts: 946
andrewc should be qualifying in the top 10 on the grid
It could possibly run in the CSCC's Modern Classics section - regulations here: https://docs.wixstatic.com/ugd/838e8...67f228cc73.pdf

or 750MC Roadsports https://www.750mc.co.uk/ugc-1/1/1/0/...4082acf631.pdf

or BARC Tintops https://www.barc.net/wp-content/uplo...nal-190301.pdf

or NSSSC http://www.darlingtondmc.com/data-fi...ulations-1.pdf

or MSV Trackday championship https://www.msvracing.com/media/3774...one-signed.pdf

amongst others...

Or you build a car that complies with several sets of regulations and gives you options without committing yourself to one championship.

These regulations have to be read alongside the Blue Book available here: https://www.motorsportuk.org/assets/...sedversion.pdf
andrewc is offline  
__________________
Andrew Cliffe - Norwich Photo & Racing Exposure
Quote
Old 27 Jun 2019, 09:20 (Ref:3914399)   #8
Lord Mr Ford.
Rookie
 
Join Date: Jun 2019
Wales
North Wales.
Posts: 6
Lord Mr Ford. should be qualifying in the top 10 on the grid
Quote:
Originally Posted by andrewc View Post
It could possibly run in the CSCC's Modern Classics section - regulations here: https://docs.wixstatic.com/ugd/838e8...67f228cc73.pdf

or 750MC Roadsports https://www.750mc.co.uk/ugc-1/1/1/0/...4082acf631.pdf

or BARC Tintops https://www.barc.net/wp-content/uplo...nal-190301.pdf

or NSSSC http://www.darlingtondmc.com/data-fi...ulations-1.pdf

or MSV Trackday championship https://www.msvracing.com/media/3774...one-signed.pdf

amongst others...

Or you build a car that complies with several sets of regulations and gives you options without committing yourself to one championship.

These regulations have to be read alongside the Blue Book available here: https://www.motorsportuk.org/assets/...sedversion.pdf
Thank you very much for this very much appreciated and has given me ideas what I can and can't do this is brilliant just the information I was looking for.
Lord Mr Ford. is offline  
Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Keep letting the military sponsor us! TWRv12 NASCAR & Stock Car Racing 10 21 Jul 2012 03:01
Supercars Join Green Revolution - it's all good !! flying finn Australasian Touring Cars. 22 4 Mar 2007 04:36


All times are GMT. The time now is 10:37.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Original Website Copyright © 1998-2003 Craig Antil. All Rights Reserved.
Ten-Tenths Motorsport Forums Copyright © 2004-2021 Royalridge Computing. All Rights Reserved.
Ten-Tenths Motorsport Forums Copyright © 2021-2022 Grant MacDonald. All Rights Reserved.